Computerized Engine Analysis
Your modern vehicle's engine is a highly sophisticated piece of equipment. The days of your father's gas-guzzler are long gone—instead, Federal Exhaust Emission and Fuel Economy regulations demand that today's vehicles be equipped with electronic engine control systems, to curb carbon emissions and increase fuel efficiency. With technically-advanced control systems taking the place of simple engine components, common maintenance services such as tune-ups are also a thing of the past. Regular services (such as spark plug and filter replacements) are still required, as well as a computerized analysis of your vehicle's control computer. Our factory-trained technicians are here to provide these basic services.
Here's how your modern vehicle's control computer operates:
A network of sensors and switches convert and monitor engine operating conditions into electrical signals. The computer receives this information, and, based on information and instructions coded within this savvy computer program, commands are sent to three different systems: ignition, fuel, and emission control. Whenever a problem arises (as seen by that nagging "check engine" light), our service pros check whatever command is prompted, in addition to the status of your engine control computer and sensors. That way you'll know if your vehicle's performance is caused by a real problem, or just a sensor/computer issue.
Here's a brief overview of your vehicle's sensory components:
- Mass airflow sensor
- Throttle position sensor
- Manifold absolute pressure sensor
- Coolant temperature sensor
- Exhaust oxygen sensor
- Crankshaft position sensor
- Camshaft position sensor
Exhaust
Your exhaust system is more than a muffler. It is a series of pipes that run under your car, connected to your muffler and catalytic converter. The main function of your exhaust system is to control noise and to funnel exhaust fumes away from passengers.
In some ways, a car's exhaust system works like a chimney on your house, directing the byproducts from burning fuel away from the people inside. A car's exhaust system routes waste gases from the engine to the rear of the car, where they are discharged into the atmosphere. Exhaust gases contain dangerous substances such as carbon monoxide, which can be hazardous if allowed to flow into the passenger housing of the car.
The exhaust system also converts pollutants into less harmful byproducts, reduces the noise of the engine, and directs exhaust gases so they can be used to heat air and fuel before they go into the engine's cylinders to be burned. Finally, the exhaust system provides just the right amount of back-pressure into the engine to improve its fuel-burning efficiency and increase performance.
Key components of your exhaust system include:
Exhaust Pipes:
Designed specifically for each car model to properly route exhaust to the back of the car.
Exhaust Manifold:
Acts like a funnel, collecting exhaust gases from all cylinders and releasing it through a single opening. Some engines have two.
Catalytic Converter:
Designed to reduce the amount of harmful emissions products by transforming pollutants into water vapor and less harmful gases.
Muffler:
Metal container with holes, baffles, and chambers that muffles exhaust noise.
Resonator:
Works with the muffler to reduce noise.
Tail Pipe:
Found at the back of the car, the tail pipe is designed to carry exhaust gases away from the vehicle
Fuel Injection Services
BG Air Intake System Cleaner
BG Air Intake System Cleaner is an extremely effective solvent/degreaser formulation that quickly removes sticky, heavy deposits which accumulate in the air throttle body assemblies and plenums of modern, multi-port fuel injected engines. Cleanup reduces harmful exhaust emissions and restores engine performance. Catalytic converter and oxygen sensor safe.
BG ISC® Induction System Cleaner™
BG ISC will quickly and safely cleans fuel injectors and remove hard, baked-on carbon deposits from intake ports, intake valves and combustion chamber. It is designed to be used with the BG 9210 Inject-A-Flush® Apparatus. For complete cleanup, BG ISC® should be used in conjunction with BG 44K®, Part No. 208, added to the vehicle fuel tank at time of service. BG ISC® will not harm gaskets, seals, hoses or any component in the fuel system if recommended cleaning procedure is followed. Catalytic converter and oxygen sensor safe.
BG Fuel Injection System Cleaner
BG Fuel Injection System Cleaner is a specially formulated blend of solvents, high molecular-weight dispersants and deposit control additives which will quickly, effectively and safely clean fuel injectors and help remove upper engine deposits.
BG 44K®
BG 44K® safely, rapidly and thoroughly removes engine deposits in combustion chambers, intake manifolds, ports and on valves. It restores flow in fuel injectors and cleans the entire fuel system. BG 44K® improves fuel economy and reduces exhaust emissions. It restores that "like new" drivability to an engine's performance and keeps it running better, longer and more efficiently. Add one can or bottle to fuel tank at fill up. Catalytic converter and oxygen sensor safe.